ASTM B564 800 Nickel Alloy Orifice Flange UNS N08800 RF FF RTJ Forged PN6-PN300 SCH160
1.Incoloy Alloy ASTM B564 800 Threaded Flanges, Werkstoff No 1.4876 Incoloy Socket Weld Flanges, 800HT Alloy Lapped joint Flanges, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Incoloy 800 Forged Flanges
2.Orifice flanges
Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.
The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2"
| Product Type |
Flanges: Weld Neck flange, Slip On flange, Blind flange, Threaded flange, Socket Weld flange, Lap Joint flange, Ring Joint flange, Plate flange, Spectacle blind, LWN, Tube Sheet,Orifice Flange, Anchor flange. |
| Pipe Fittings: Elbow LR/SR, 45°/90°/180°;Tee Straight/Reducing; Reducer Concentric/Eccentric; Cross; Cap; Saddle |
| STANDARDS |
ANSI B16.5; ANSI/ASME B16.9; ASME B16.11; ASME B16.47, AWWA C207; EN1092-1; DIN; GOST; JIS B2220; JIS B2311; BS4504; BS10; UNI; SABS 1123 |
| MATERIALS |
Carbon Steel:
Flanges:-ASTM A105/105N; A36; A694 F42-F70; A350 LF1/LF2; P235GH; P245GH; P250GH; P265GH; P280GH; ST37.2; S235JR; C22.8; CT20; CT3; SS400; SF390A; SF440A;
Pipe Fittings: ASTM A234 WPB; ST35.8; P265GH; JIS G3452; SS400; CT20; 09T2C;
|
|
Stainless Steel:
Flanges: ASTM A182 F304/304L; F316/316L; F321; F51; 12X18H10T; 10X17H13M2T; SUS F304/F304L; F316/F316L; 1.4301;1.4306; 1.4401; 1.4404; 1.4521; 1.4571;
Pipe Fittings: A403 WP304/304L; WP316/316L; WP317/317L; WP321; 1.4301;1.4306; 1.4401; 1.4404; 1.4521; 1.4571; SUS304/304L; SUS316/316L; SUS321; 08X18H10; 03X18H11; 12X18H10T; 10X17H13M; 10X17H13M2T
|
| Alloy Steel: ASTM A182 F11/F12/F22; 09T2C; 15X5M; SFVA F1/F1A |
| PRESSURE |
150LB-2500LB; PN6-PN300; 1K-30K; |
| WALL THICKNESS |
SCH5,SCH10S,SCH10,SCH20,SCH30,STD,SCH40,XS,SCH60,
SCH80,SCH100,SCH120,SCH140,SCH160,XXS
|
| SIZE |
DN10-DN3000; 1/2"-144"; 10A-1500A; |
| SURFACE FINISH |
Electroplate; H.D.G.; Yellow paint; Black Paint; Anti-rust oil |
3. INCOLOY 800 FLANGES CHEMICAL COMPOSITION
| Grade |
C |
Mn |
Si |
S |
Ni |
Cr |
Fe |
Al |
Ti |
| Incoloy 800 |
0.1 max |
1.5 max |
1.0 max |
0.015 max |
30-35 |
19-23 |
39.5 min |
0.15-0.60 |
0.15-0.60 |
4. INCOLOY 800 FLANGES MECHANICAL PROPERTIES
| Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| 7.94 g/cm3 |
1385 °C (2525 °F) |
Psi – 75,000 , MPa – 520 |
Psi – 30,000 , MPa –205 |
30 % |
5. INCOLOY 800 FLANGES Specifications
| Specifications |
ASTM B564 / ASME SB564 |
| Size |
1/2″NB TO 60″NB |
| Standards |
ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure |
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard |
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
6.Types of Incoloy 800 Flanges
Incoloy 800 Slip On Flanges
Incoloy 800 Raised Face Slip On Flanges
800 Alloy Slip On Plate Flanges
Incoloy UNS N08800 Slip On Flanges
Incoloy WERKSTOFF NR. 1.4876 45 SORF Flanges
ASME SB564 Alloy 800 Slip On Flanges
Incoloy 800 Weld Neck Flanges
Incoloy 800 Raised Face Weld Neck Flanges
800 Alloy Weld Neck Flanges
Incoloy UNS N08800 Weld Neck Flanges
Product Attribute
| Place of Origin |
China |
Brand Name |
BOYUE |
| Standard |
ANSI, ISO, ASME, DIN, ASTM |
Type |
Orifice Flange |
| ModelNumber |
Alloy 31 |
Thickness |
#150,#300,#600,.#900,#1500,#2500 |
| Packing |
Ply-Wood Cases |
Payment |
30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: |
1pcs |
| Price: |
Depending on quantity |
| Payment Terms: |
T/T or Western Union or LC |
| Supply Ability: |
40000pcs per month |
| Delivery Time: |
10-100 days depending on quantity |
| Packaging Details: |
PLY-WOODEN CASE OR PALLET |
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.
Your message must be between 20-3,000 characters!
