BoYue Steel China Co.,Ltd
BoYue&Tianda Oil Pipe Co., Ltd
BoYue Industry (ShangHai) Co., Ltd
BoYue & BaoSteel Pipeline Equipment Co.,Ltd
Payment & Shipping Terms:
|Name:||SO Pipe Flanges||Material:||Alloy Steel|
|Size:||2"-12"||Pressure:||150#, 300#, 400#, 600#, 900#, 1500#, 2500#|
|Manufacturing Process:||Push,Press,Forge,Cast,etc.||Standard:||ANSI:ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48,DIN:DIN2527, DIN2566, DIN2573, DIN2|
|Delivery Time:||20 Work Days||Flange Type:||WELD NECK FLANGE , LAP JOINT FLANGE, BLIND FLANGE, SLIP ON FLANGE, THREAD FLANGE, SOCKET WELD FLANGE ORIGICE FLANGE , SPECTTACLE FLANGE, OVERLAY CLADDING|
flange slip on type,
slip on forged steel flange
Forged Slip On Pipe Flanges150LB 300 LB B16.5 Stainless Steel Seamless Size1/2'-24'
The slip on flange welding also simplified as SO flange. It is used by inserting the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s OD, the parts could be connected by lap welding at the top and bottom of the flange. Slip on steel pipe flange is normally with raised face (RF) or flat face (FF), and also available in TG and MFM.
|Type||A 182 F 44 Slip On flange|
|Size||1/2" to 80"|
|Standards||SO, WN, SW, TH, LJ, BL, PL, etc|
Carbon Steel Plate Flanges: ASTM A105/A105N, etc
Stainless Steel Plate Flanges: ASTM A182 F304/304L/304H, F316/316L, F310, F321, F904L, etc
Alloy Steel Plate Flanges: ASTM A182 F1, F5, F9, F11, F22, F91, etc
Nickel Alloys Plate Flanges: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II).
Duplex, Super Duplex Plate Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205 (UNS No. S31803), 2507 (UNS No.S32750), etc
Copper Alloy Plate Flanges: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C71500 (Cu -Ni- 70/30), etc
|Applications||Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc|
Most used pipe flange
Slip on pipe flange is suitable for the lower pressure, general temperature and normal circumstance pipelines. It is easy to install and with lower cost/price, has been most used in the common industries.
Slip-on flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications.
Why slip on flanges are preferred to welding neck flanges?
For many users, slip on flanges continue to be preferred to welding neck flanges because of the following reasons:
How to measure slip-on flanges?
Take the measurements of:
Key Features of Slip-On Flanges :
Some important features are as follows:
One size fits all pipe schedules.
Fabricators can more easily cut pipe to length for slip-on flanges.
The smaller thickness of this flange allows for easier alignment of bolting holes.
They are generally not preferred for high pressure temperature environments.
Advantages of slip on flanges:
Low cost installation
Less time needed to spent on ensuring the accuracy of the cut pipe
they are somewhat easier to align
the slip-on flanges have low hub because the pipe slips into the flange before welding
the flange is welded both inside and outside to provide sufficient strength
they prevent leakage
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
Stainless Steel Slip on Flanges: ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel Slip on Flanges : ASTM A 105, ASTM A 181
Alloy Steel Slip on Flanges: ASTM A 182, GR F1, F11, F22, F5, F9, F91
|Place of Origin||China||Brand Name||BOYUE|
|Standard||ASME B16.5||Type||SO Flange|
|ModelNumber||Duplex Stainless Steel||Thickness||Sch40s,Sch80s,sch160|
|Packing||Ply-Wood Cases||Payment||30%TT+70% Balance|
Supply Ability:30000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally ply wooden case or following customer's requirement.
|Price:||Depending on quantity|
|Minimum Order Quantity||1 PCS|
|Payment Terms:||T/T or Western Union or LC|
|Supply Ability:||3,0000pcs per month|
|Delivery Time:||10-100 days depending on quantity|
|Packaging Details:||PLY-WOODEN CASE OR PALLET|
Why Choose Us
1.One-Stop Service,One Single Source.
3.Best quality,competitive price
6.Professional sales and technical team .
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.